Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
73230
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Driver Side)
| *1 | Hook and Loop Fastener |
| *2 | Protruding Part |
Install the front seat inner belt assembly RH with the bolt and washer.
Do not place the front seat inner belt assembly RH over the protruding part of the front seat inner track.
Engage the clamp.
Fasten the hook and loop fastener and close the front seat cushion cover.
Engage the 2 clamps.
Install a new band.
73240
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Front Passenger Side)
| *1 | Hook and Loop Fastener |
| *2 | Protruding Part |
Install the front seat inner belt assembly LH with the bolt and washer.
Do not place the front seat inner belt assembly LH over the protruding part of the front seat inner track.
Engage the clamp.
Fasten the hook and loop fastener and close the front seat cushion cover.
Engage the 3 clamps.
Connect the connector.
3.INSTALL FRONT SEAT ASSEMBLY