Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Dual Beam Headlight) › from 2015.08
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0195741 HEADLIGHT ASSEMBLY(for Dual Beam Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Dual Beam Headlight)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81110B 1.REMOVE NO. 1 HEADLIGHT BULB

a.
E322285

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not touch the glass part of the bulb.



Hide 81110D 2.REMOVE NO. 2 HEADLIGHT BULB

a.
E322286

Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not touch the glass part of the bulb.



Hide 81615D 3.REMOVE CLEARANCE LIGHT SOCKET

a.
E322287

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB

a.

Remove the clearance light bulb from the clearance light socket.


Hide 81515B 5.REMOVE FRONT TURN SIGNAL LIGHT SOCKET

a.
E322646

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


Hide 81510C 6.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.

Remove the front turn signal light bulb from the front turn signal light socket.