Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Dual Beam Headlight) › from 2015.08
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0195741 HEADLIGHT ASSEMBLY(for Dual Beam Headlight) G

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Dual Beam Headlight)  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81515B 1.INSPECT FRONT TURN SIGNAL LIGHT SOCKET

a.
E184506C06
1.396,1.406 0.979,1.698 true 2.031,1.396 2.552,1.698 true 0.198,0.052 0.75,0.479 0.552,0.427 10 false *a 0.865,1.719 1.26,2.104 0.396,0.385 10 false - 2.646,1.677 3.083,2.052 0.438,0.375 10 false +
*a Component without harness connected
(Front Turn Signal Light Socket)


Apply battery voltage to the terminals and check that the front turn signal light comes on.

Standard:
Battery Connection Condition
Battery positive (+) → 1 (+)
Battery negative (-) → 2 (-)
Front turn signal light comes on


HINT:

Use a new bulb or known good one.



Hide 81615D 2.INSPECT CLEARANCE LIGHT SOCKET

a.
E175211C01
1.448,1.292 1.135,1.521 true 1.948,1.292 2.365,1.542 true 1.833,1.094 2.188,1.479 0.354,0.385 10 1 1.49,1.094 1.896,1.479 0.406,0.385 10 2 0.125,0.083 0.583,0.49 0.458,0.406 10 *a 0.969,1.438 1.375,1.76 0.406,0.323 10 - 2.417,1.469 2.792,1.792 0.375,0.323 10 +
*a Component without harness connected
(Clearance Light Socket)


Apply battery voltage to the terminals and check that the clearance light comes on.

Standard:
Battery Connection Condition
Battery positive (+) → 1 (+)
Battery negative (-) → 2 (-)
Clearance light comes on


HINT:

Use a new bulb or known good one.