Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Dual Beam Headlight) › from 2015.08
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0195741 HEADLIGHT ASSEMBLY(for Dual Beam Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Dual Beam Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81510C 1.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


Hide 81515B 2.INSTALL FRONT TURN SIGNAL LIGHT SOCKET

a.
E322647

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and install them as a unit.


Hide 81610F 3.INSTALL CLEARANCE LIGHT BULB

a.

Install the clearance light bulb to the clearance light socket.


Hide 81615D 4.INSTALL CLEARANCE LIGHT SOCKET

a.
E322648

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow in the illustration, and install them as a unit.


Hide 81110D 5.INSTALL NO. 2 HEADLIGHT BULB

a.
E322649

Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

NOTICE:

Do not touch the glass part of the bulb.



Hide 81110B 6.INSTALL NO. 1 HEADLIGHT BULB

a.
E322650

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

NOTICE:

Do not touch the glass part of the bulb.