Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
87947B
1.REMOVE OUTER REAR VIEW MIRROR LH
87945
2.REMOVE UPPER OUTER MIRROR COVER LH (w/o Side Turn Signal Light)
Remove the 3 screws to separate the actuator unit.
Disengage the 7 claws from the inside of the mirror body to remove the upper outer mirror cover LH.
87945
3.REMOVE UPPER OUTER MIRROR COVER LH (w/ Side Turn Signal Light)
Use the same procedure as for the upper outer mirror cover LH (w/o Side Turn Signal Light).
87945B
4.REMOVE LOWER OUTER MIRROR COVER LH
Remove the 2 screws.
Disengage the claw to remove the lower outer mirror cover LH.