Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › from 2015.08
RM19Y0E _58 Vehicle Interior _003013 HEATING / AIR CONDITIONING _0193103 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD and LHD vehicles.

·

The procedure listed below is for the RHD vehicle.



PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
E322267C01
0.656,1.469 1.26,1.625 false 0.469,1.406 0.781,1.563 0.313,0.156 10 false *1
*1 Modulator


Using needle nose pliers, install the cooler dryer onto the modulator.


b.
E101932

Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

Compressor oil:

ND-OIL 8 or equivalent



c.
E322266C01
0.719,1.208 1.375,1.156 false 0.74,1.792 1.302,1.604 false 0.542,1.125 0.854,1.281 0.313,0.156 10 false *1 0.552,1.74 0.865,1.896 0.313,0.156 10 false *2
*1 14 mm Straight Hexagon Wrench
*2 Modulator


Using a 14 mm straight hexagon wrench, install the cap into the modulator.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)