11101J
1.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
for Exhaust Side
Disengage the claw and remove the cover.
Disconnect the camshaft timing oil control valve assembly connector.
Remove the bolt and the camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.
If a component has been dropped or subjected to a strong impact, replace it.
| *1 | O-ring |
Remove the O-ring from the camshaft timing oil control valve assembly.
for Intake Side
Disconnect the camshaft timing oil control valve assembly connector.
Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.
If a component has been dropped or subjected to a strong impact, replace it.
| *1 | O-ring |
Remove the O-ring from the camshaft timing oil control valve assembly.