Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › THROTTLE BODY › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196152 THROTTLE BODY G

1NR-VE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A159755C07
2.219,2.104 2.135,2.542 true 2.51,2.115 2.573,2.521 true 2.042,2.573 2.26,2.729 0.219,0.156 10 false M+ 2.51,2.573 2.698,2.729 0.188,0.156 10 false M- 0.188,0.177 0.5,0.333 0.313,0.156 10 false *a
*a Component without harness connected
(Throttle Body with Motor Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 25°C (77°F) 1.28 to 1.48 Ω


If the result is not as specified, replace the throttle body with motor assembly.