Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › THROTTLE BODY › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196152 THROTTLE BODY A

1NR-VE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 51473A 1.REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH (w/ Heater)

Hide 2.DRAIN ENGINE COOLANT (w/ Heater)

Hide 17700 3.REMOVE AIR CLEANER ASSEMBLY

a.
A353458C01
1.792,1.302 1.948,1.01 true 2.177,1.146 2.76,1.177 true 2.104,0.708 1.948,0.333 true 1.646,1.292 1.844,1.458 0.198,0.167 10 true *1 2.802,1.115 3.115,1.271 0.313,0.156 10 false *2 1.771,0.167 2.021,0.333 0.25,0.167 10 true *3
*1 No. 2 Fuel Vapor Feed Hose
*2 No. 1 Charcoal Canister Hose
*3 No. 1 Vacuum Switching Valve Assembly


Disconnect the No. 2 fuel vapor feed hose, No. 1 charcoal canister hose and connector from the No. 1 vacuum switching valve assembly.


b.

Disengage the guide and disconnect the No. 2 ventilation hose.


c.

Disconnect the harness clamp from the air cleaner cap sub-assembly.


d.
A364926

Disengage the 2 guides and disconnect No. 1 charcoal canister hose from the air cleaner cap sub-assembly (for LHD).


e.
A353460

Disconnect the harness clamp and connector from the intake air flow meter assembly.


f.
A353461C01
3.073,1.438 3.198,1.344 false 0.469,0.25 0.625,0.354 false 0.313,0.115 0.625,0.271 0.313,0.156 10 false *1 3.198,1.219 3.396,1.417 0.198,0.198 10 false *2
*1 No. 1 Air Cleaner Hose
*2 No. 2 Air Cleaner Hose


Loosen the 2 hose clamps and disconnect the No. 1 air cleaner hose and No. 2 air cleaner hose.


g.
A353459

Remove the 2 bolts and air cleaner assembly.


Hide 17881 4.REMOVE NO. 1 AIR CLEANER HOSE

a.
A353457C01
2.583,0.563 3.031,0.229 true 3.031,0.094 3.344,0.25 0.313,0.156 10 false *1
*1 No. 2 Ventilation Hose


Loosen the clip and disconnect the No. 2 ventilation hose.


b.

Loosen the hose clamp and remove the No. 1 air cleaner hose.


Hide 16261 5.DISCONNECT NO. 1 WATER BY-PASS HOSE (w/ Heater)

a.
A363881

Loosen the clip and disconnect No. 1 water by-pass hose.


Hide 16264 6.DISCONNECT NO. 2 WATER BY-PASS HOSE (w/ Heater)

a.
A364913

Loosen the clip and disconnect No. 2 water by-pass hose.


Hide 22030 7.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A353462

Disconnect the throttle body with motor assembly connector.


b.

Remove the 3 bolts and the throttle body with motor assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.



Hide 22271A 8.REMOVE THROTTLE BODY GASKET

a.
A353463

Remove the throttle body gasket from the intake manifold.