Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196156 CAMSHAFT POSITION SENSOR A

1NR-VE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11101E 1.REMOVE CAM POSITION SENSOR

a.

for Intake Side

i.
A353472

Disconnect the cam position sensor connector.


ii.

Remove the bolt and cam position sensor from the cylinder head cover sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.




b.

for Exhaust Side

i.
A360047

Disconnect the cam position sensor connector.


ii.

Remove the bolt and cam position sensor from the cylinder head cover sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.