Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › KNOCK SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196160 KNOCK SENSOR G

1NR-VE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK CONTROL SENSOR

a.
A171218C05
0.063,0.063 0.375,0.26 0.313,0.198 10 false *a
*a Component without harness connected
(Knock Control Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock control sensor.