Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › HEATED OXYGEN SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196161 HEATED OXYGEN SENSOR G

1NR-VE ENGINE CONTROL  HEATED OXYGEN SENSOR  INSPECTION  


PROCEDURE

Hide 89465 1.INSPECT OXYGEN SENSOR

a.
A244700C12
0.99,0.5 1.396,0.75 true 2,0.833 2.531,0.563 true 0.958,1.646 1.385,1.375 true 0.135,0.073 0.594,0.333 0.458,0.26 10 false *a 2.573,0.479 3.24,0.833 0.667,0.354 10 false HT1B 0.771,0.417 1.292,0.802 0.521,0.385 10 false +B 0.781,1.604 1.271,1.792 0.49,0.188 10 false E2
*a Component without harness connected
(Oxygen Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HT1B) - 2 (+B) 20°C (68°F) 11.7 to 15.5 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher


If the result is not as specified, replace the oxygen sensor.