89539F
1.INSTALL ECU BRACKET
Install the ECU bracket onto the ECM with the 4 bolts.
89561
2.INSTALL ECM
Install the ECM with ECU bracket with the 3 bolts.
If a component has been dropped or subjected to a strong impact, replace it.
Connect the 2 ECM connectors and lower the 2 levers.
When connecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.
Make sure that the 2 levers are locked securely.
Connect the harness clamp.
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL