Home › Engine / Hybrid System › 2NR-VE ENGINE CONTROL › ECM › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042272 2NR-VE ENGINE CONTROL _0196167 ECM A

2NR-VE ENGINE CONTROL  ECM  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 89561 2.REMOVE ECM

a.
A353465

Raise the 2 levers while pushing the locks on the levers, and disconnect the 2 ECM connectors.

NOTICE:

After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.



b.

Disconnect the harness clamp.


c.
A353466

Remove the 3 bolts and ECM with ECU bracket.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.



Hide 89539F 3.REMOVE ECU BRACKET

a.
A353467

Remove the 4 bolts and ECU bracket from the ECM.