19100P
1.INSTALL SPARK PLUG
Install the 4 spark plugs to the cylinder head sub-assembly.
If a component has been dropped or subjected to a strong impact, replace it.
Install the same parts in the same combination to the original locations.
19500
2.INSTALL IGNITION COIL ASSEMBLY
| *a | Ignition Coil Assembly Body |
| *b | Plug Cap |
Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
If a component has been dropped or subjected to a strong impact, replace it.
Install the same parts in the same combination to the original locations.
Connect the 4 ignition coil assembly connectors.
Engage the 2 harness clamps and install the wire harness to the cylinder head cover sub-assembly.