Home › Engine / Hybrid System › 2NR-VE ENGINE CONTROL › INTEGRATION RELAY › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042272 2NR-VE ENGINE CONTROL _0196176 INTEGRATION RELAY A

2NR-VE ENGINE CONTROL  INTEGRATION RELAY  REMOVAL  


PROCEDURE

Hide 82661 1.REMOVE NO. 1 RELAY BLOCK COVER

a.
A360053

Disengage the 2 claws and remove the No. 1 relay block cover.


Hide 82641 2.REMOVE NO. 1 INTEGRATION RELAY

a.
A360459

Disconnect the connector.


b.

Disengage the 2 claws and disconnect the No. 1 integration relay.


c.
A360027

Disconnect the 3 connectors and remove the No. 1 integration relay.