Home › Engine / Hybrid System › 1NR-VE ENGINE MECHANICAL › CYLINDER HEAD › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042273 1NR-VE ENGINE MECHANICAL _0196185 CYLINDER HEAD A

1NR-VE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13716 1.REMOVE VALVE STEM CAP

a.
A198011

Remove the 16 valve stem caps from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in the correct order.



Hide 13711 2.REMOVE INTAKE VALVE

a.
A314488C03
0.677,0.438 0.958,0.573 false 1.917,3.115 2.073,2.854 true 1.792,3.177 2.104,3.333 0.313,0.156 10 false *a 0.365,0.354 0.823,0.552 0.458,0.198 10 false SST
*a Wooden Block


Using SST and wooden blocks, compress and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  

HINT:

Arrange the removed parts in the correct order.



b.

Remove the valve spring retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 3.REMOVE EXHAUST VALVE

a.
A314489C03
2.969,2.167 3.125,1.917 true 2.083,3.052 2.24,2.802 true 1.958,0.708 2.115,0.49 false 2.833,2.167 3.146,2.323 0.313,0.156 10 false *a 2.146,0.375 2.604,0.573 0.458,0.198 10 false SST 1.917,3.042 2.229,3.198 0.313,0.156 10 false *a
*a Wooden Block


Using SST and wooden blocks, compress and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  

HINT:

Arrange the removed parts in the correct order.



b.

Remove the valve spring retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 4.REMOVE VALVE STEM OIL SEAL

a.
A198016

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 5.REMOVE VALVE SPRING SEAT

a.
A198017

Using compressed air and Magnet Hand, remove the valve spring seats by blowing air onto them.