Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › DRIVE BELT › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042274 2NR-VE ENGINE MECHANICAL _0196188 DRIVE BELT A

2NR-VE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

a.
A360065

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, and remove the fan and generator V belt from the V-ribbed belt tensioner assembly.


b.

While turning the V-ribbed belt tensioner assembly counterclockwise, align the holes, and then insert a 5 mm hexagon wrench into the holes to secure the V-ribbed belt tensioner assembly.