Home › Engine / Hybrid System › 1NR-VE FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042275 1NR-VE FUEL _0196200 FUEL SENDER GAUGE ASSEMBLY G

1NR-VE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.

Check that the float moves smoothly between F and E.


b.
A359816C01
0.25,0.094 0.563,0.25 0.313,0.156 10 false *a 0.438,1.594 0.615,1.76 0.177,0.167 10 false *b 0.698,3.063 0.896,3.219 0.198,0.156 10 false *c 0.417,2.344 0.667,2.521 0.25,0.177 10 false 1/2
*a Component without harness connected
(Fuel Sender Gauge Assembly)
*b F (Upper End)
*c E (Lower End)


Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 - 2 F (Upper End) 13.5 to 16.5 Ω
1 - 2 1/2 178.4 to 200.4 Ω
1 - 2 E (Lower End) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.