25860
1.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
Install the No. 1 vacuum switching valve assembly with the bolt.
| *1 | No. 1 Charcoal Canister Outlet Hose |
| *2 | No. 2 Fuel Vapor Feed Hose |
| *a | Paint Mark |
| *b | Upper Side |
| *c | Front Side |
| *d | LH Side |
| *e | 40° |
Connect the No. 1 charcoal canister outlet hose and No. 2 fuel vapor feed hose as shown in the illustration.