Home › Engine / Hybrid System › 2NR-VE EMISSION CONTROL › PCV VALVE › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042278 2NR-VE EMISSION CONTROL _0196218 PCV VALVE G

2NR-VE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT VENTILATION VALVE SUB-ASSEMBLY

a.

Install a clean hose to the ventilation valve sub-assembly.


b.

Check the ventilation valve sub-assembly operation.

i.
A287373C02
1.854,0.417 2.063,0.417 2.063,0.417 2.354,0.719 false 1.656,0.354 1.969,0.51 0.313,0.156 10 *a 2.875,1.042 3.188,1.198 0.313,0.156 10 *b
*a Clean Hose
*b Air
V100135

Cylinder Head Cover Sub-assembly Side


Blow air into the cylinder head cover sub-assembly side, and check that air passes through easily.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.


ii.
A287372C02
0.656,0.844 0.823,0.573 0.823,0.573 0.99,0.573 false 1.052,0.5 1.365,0.656 0.313,0.156 10 *a 0.49,1.021 0.802,1.177 0.313,0.156 10 *b
*a Clean Hose
*b Air
V100135

Intake Manifold Side


Blow air into the intake manifold side, and check that air passes through with difficulty.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the ventilation valve sub-assembly.



c.

Remove the clean hose from the ventilation valve sub-assembly.