Home › Engine / Hybrid System › 1NR-VE COOLING › THERMOSTAT › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042281 1NR-VE COOLING _0196234 THERMOSTAT G

1NR-VE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 1.INSPECT THERMOSTAT

a.

Check the valve opening temperature of the thermostat (element, spring and frame).

Standard Valve Opening Temperature:

80 to 84°C (176 to 183°F)


HINT:

If the valve opening temperature is not as specified, replace the thermostat (element, spring and frame).



b.
A256585C01
1.24,0.01 1.552,0.167 0.313,0.156 10 *a
*a 8.5 mm or more


Check the valve lift.

Standard Valve Lift:

8.5 mm (0.335 in.) or more at 95°C (203°F)


HINT:

If the valve lift is not as specified, replace the thermostat (element, spring and frame).



c.

Check that the valve is fully closed when the element is at low temperatures (below 77°C (171°F)).

HINT:

If the valve is not fully closed, replace the thermostat (element, spring and frame).