Home › Engine / Hybrid System › 2NR-VE COOLING › COOLING FAN SYSTEM › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042282 2NR-VE COOLING _0196236 COOLING FAN SYSTEM G

2NR-VE COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

a.

Connect the GTS or Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS or Techstream on.


d.

Enter the following menus: Powertrain / EFI / Active Test / Radiator fan.


e.

Check the operation of the cooling fan while operating it using the GTS or Techstream.

If the cooling fan motor does not operate, check the cooling fan circuit.

Click hereEngine / Hybrid System>2NR-VE COOLING>COOLING FAN SYSTEM>Cooling Fan Circuit