Home › Vehicle Exterior › HORN › HORN › from 2015.08
RM19Y0E _59 Vehicle Exterior _003021 HORN _0015294 HORN A

HORN  HORN  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD and LHD vehicles.

·

The procedure listed below is for the RHD vehicle.



PROCEDURE

Hide 86510 1.INSTALL HIGH PITCHED HORN ASSEMBLY

a.

Engage the guide to install the high pitched horn assembly with the bolt.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


b.

Connect the connector.


Hide 86520 2.INSTALL LOW PITCHED HORN ASSEMBLY

a.
B411172C01
2.375,0.573 3.031,0.75 true 3.094,0.677 3.406,0.833 0.313,0.156 10 false *1
*1 Stopper


With the bracket of the low pitched horn assembly touching the stopper, install the low pitched horn assembly with the bolt.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


b.

Connect the connector.


Hide 81110 3.INSTALL HEADLIGHT ASSEMBLY RH (for Single Beam Headlight)

HINT:

The procedure listed below is for the LH side (Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY(for Single Beam Headlight)>INSTALLATION).


Hide 81110 4.INSTALL HEADLIGHT ASSEMBLY RH (for Dual Beam Headlight)

HINT:

The procedure listed below is for the LH side (Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY(for Dual Beam Headlight)>INSTALLATION).