Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Single Beam Headlight) › from 2015.08
RM19Y0E _59 Vehicle Exterior _003020 LIGHTING (EXT) _0015282 HEADLIGHT ASSEMBLY(for Single Beam Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Single Beam Headlight)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81139 1.REMOVE HEADLIGHT SOCKET COVER

a.
E322278

Remove the headlight socket cover.


Hide 81110B 2.REMOVE NO. 1 HEADLIGHT BULB

a.
E322279N01
2.375,1.656 2.531,1.854 0.156,0.198 10 true 1 1.875,0.292 2.031,0.49 0.156,0.198 10 true 2

Release the set spring lock as shown in the illustration and remove the No. 1 headlight bulb.

NOTICE:

Do not touch the glass part of the bulb.



Hide 81615D 3.REMOVE CLEARANCE LIGHT SOCKET

a.
E322280

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB

a.

Remove the clearance light bulb from the clearance light socket.


Hide 81515B 5.REMOVE FRONT TURN SIGNAL LIGHT SOCKET

a.
E322281

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


Hide 81510C 6.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.

Remove the front turn signal light bulb from the front turn signal light socket.