52713
1.REMOVE FRONT BUMPER SIDE MOULDING LH
Disengage the 2 claws and 3 guides to remove the front bumper side moulding LH.
52712
2.REMOVE FRONT BUMPER SIDE MOULDING RH
Use the same procedure as for the LH side.
52119A
3.REMOVE FRONT BUMPER COVER
| *1 | Protective Tape |
Apply protective tape as shown in the illustration.
Remove the 4 bolts.
Remove the 3 bolts.
Remove the 4 clips.
Remove the 6 clips.
except Sports Package
Remove the 2 clips.
Use the same procedure for the RH side and LH side.
for Sports Package
Remove the 3 clips.
Use the same procedure for the RH side and LH side.
Disengage the 4 claws.
Use the same procedure for the RH side and LH side.
Disconnect the 2 connectors (w/ Fog Light).
Remove the front bumper cover.