Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR › from 2015.08
RM19Y0E _59 Vehicle Exterior _003019 WIPER / WASHER _0015272 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught by moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
E132856C18
0.917,1.813 1.479,1.406 true 2.396,1.802 1.927,1.448 true 0.927,0.531 1.344,0.948 true 0.073,0.052 0.385,0.208 0.313,0.156 10 false *a 0.677,1.75 0.99,1.948 0.313,0.198 10 false LO 0.677,0.417 0.99,0.615 0.313,0.198 10 false HI 2.458,1.729 2.615,1.927 0.156,0.198 10 false E
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Connect a battery positive (+) lead to terminal 5 (LO) and a negative (-) lead to terminal 4 (E), and check that the motor operates at low speed (LO).

OK:

Motor operates at low speed (LO).


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Connect a battery positive (+) lead to terminal 3 (HI) and a negative (-) lead to terminal 4 (E),and check that the motor operates at high speed (HI).

OK:

Motor operates at high speed (HI).


If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
E132856C19
0.917,1.813 1.479,1.406 true 2.396,1.802 1.927,1.448 true 2.406,0.625 2.063,0.927 true 0.073,0.052 0.385,0.208 0.313,0.156 10 false *a 0.76,1.771 1.073,1.969 0.313,0.198 10 false E 2.5,0.448 2.906,0.635 0.406,0.188 10 false LO 2.458,1.729 2.729,2 0.271,0.271 10 false HI
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Connect a battery positive (+) lead to terminal 1 (LO) and a negative (-) lead to terminal 5 (E), and check that the motor operates at low speed (LO).

OK:

Motor operates at low speed (LO).


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Connect a battery positive (+) lead to terminal 4 (HI) and a negative (-) lead to terminal 5 (E),and check that the motor operates at high speed (HI).

OK:

Motor operates at high speed (HI).


If the result is not as specified, replace the windshield wiper motor assembly.