85212A
1.REMOVE FRONT WIPER BLADE
Raise the front wiper arm away from the front windshield glass.
Disengage the claw to remove the front wiper blade as shown in the illustration.
85214A
2.REMOVE WIPER RUBBER
Disengage the head part (large side) of the wiper rubber from the front wiper blade.
| *a | Head Part (Large Side) |
Remove the wiper rubber in the direction indicated by the arrow in the illustration.
Remove the 2 backing plates from the wiper rubber.
85214A
3.INSTALL WIPER RUBBER
| *a | Curved |
Install the 2 backing plates to the wiper rubber.
Install the backing plates so that they are facing the proper direction.
| *a | Head Part (Large Side) |
Install the wiper rubber to the claw of the front wiper blade in the direction indicated by the arrow in the illustration.
Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.
Engage the head part (large side) of the wiper rubber to the rear end side claw of the front wiper blade.
Push the wiper blade into the grooves of the wiper rubber so that it is completely attached.
85212A
4.INSTALL FRONT WIPER BLADE
Engage the claw to install the front wiper blade.