Home › Engine / Hybrid System › 2NR-VE ENGINE CONTROL › AIR FUEL RATIO SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042272 2NR-VE ENGINE CONTROL _0196380 AIR FUEL RATIO SENSOR G

2NR-VE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A244699C17
0.969,0.521 1.479,0.792 true 1.927,0.802 2.542,0.552 true 0.958,1.656 1.49,1.385 true 0.104,0.042 0.323,0.198 0.219,0.156 10 false *a 2.594,0.448 3.083,0.625 0.49,0.177 10 false HT 0.75,0.385 1.01,0.615 0.26,0.229 10 false +B 0.833,1.677 1.313,1.854 0.479,0.177 10 false AF-
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HT) - 2 (+B) 20°C (68°F) 1.98 to 2.64 Ω
1 (HT) - 4 (AF-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.