Home › Engine / Hybrid System › 2NR-VE ENGINE CONTROL › AIR FUEL RATIO SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042272 2NR-VE ENGINE CONTROL _0196380 AIR FUEL RATIO SENSOR A

2NR-VE ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


PROCEDURE

Hide 89467B 1.REMOVE AIR FUEL RATIO SENSOR

a.
A360023C01
1.344,1.458 1.021,0.792 true 0.875,0.625 1.188,0.823 0.313,0.198 10 false *1
*1 Radiator Pipe Sub-assembly


Disconnect the air fuel ratio sensor connector.


b.

Disengage the 2 harness clamps and disconnect the air fuel ratio sensor wire from the radiator pipe sub-assembly.


c.
A360025

Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

SST
09224-00010  

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.