Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › from 2015.08
RM19Y0E _58 Vehicle Interior _003012 SEAT BELT _0015223 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


a.

Seat belt warning light operation for driver side seat belt:

The driver side seat belt warning light on the combination meter assembly blinks or turns off in accordance with the driver side seat belt state and vehicle speed.


b.

Seat belt warning light operation for front passenger side seat belt:

The front passenger side seat belt warning light on the telltale light assembly blinks or turns off in accordance with whether the front passenger side seat is occupied, the front passenger side seat belt state and vehicle speed.


c.

Seat belt warning buzzer:

When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger side seat occupied and the driver side or front passenger side seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds.

After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 90 seconds.



FUNCTION OF MAIN COMPONENTS


Component Function
Front seat inner belt assembly RH*1 Informs the main body ECU (fuse block assembly) of the driver side seat belt condition (fastened or unfastened).
Front seat inner belt assembly RH*2 Informs the main body ECU (fuse block assembly) of the front passenger side seat belt condition (fastened or unfastened).
Front seat inner belt assembly LH*1 Informs the main body ECU (fuse block assembly) of the front passenger side seat belt condition (fastened or unfastened).
Front seat inner belt assembly LH*2 Informs the main body ECU (fuse block assembly) of the driver side seat belt condition (fastened or unfastened).
Belt warning occupant detection sensor Informs the main body ECU (fuse block assembly) of the front passenger side seat condition (occupied or unoccupied).
Main body ECU (fuse block assembly)
·

Sends the driver side seat belt buckle switch signal to the combination meter assembly via CAN communication.

·

Sends the front passenger side seat belt buckle switch signal to the combination meter assembly via CAN communication.


Driver side seat belt warning light If driver side seat belt is unfastened and ignition switch is ON, combination meter flashes seat belt warning light in combination meter assembly as reminder.
Front passenger side seat belt warning light If front passenger side seat belt is unfastened when front passenger side seat is occupied with ignition switch ON, combination meter flashes front passenger side seat belt warning light in hazard warning signal switch assembly as reminder.
Seat belt warning buzzer If vehicle is driven at approximately 20 km/h (12 mph) or more with any of following conditions met, combination meter sounds buzzer as reminder.
·

Driver side seat belt is unfastened

·

Front passenger side seat belt is unfastened with front passenger side seat occupied.



*1: for RHD

*2: for LHD