CHECK MAIN BODY ECU (FUSE BLOCK ASSEMBLY)
Disconnect the 3A, 3G and 3K main body ECU (fuse block assembly) connectors.
Measure the resistance and voltage according to the value(s) in the table below.
Measure the values on the wire harness side with the connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 3A-1 - Body ground | B - Body ground | Battery power supply | Always | 11 to 14 V |
| 3G-1 - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| 3G-11 - Body ground | W - Body ground | Ground | Always | Below 1 Ω |
| 3G-12 - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| 3K-10 - Body ground | LG - Body ground | Driver side seat belt buckle switch signal | Driver side seat belt fastened | 10 kΩ or higher |
| Driver side seat belt unfastened | Below 1 Ω | |||
| 3K-3 - Body ground | B - Body ground | Front passenger side seat belt buckle switch signal | Front passenger side seat occupied, seat belt fastened | 10 kΩ or higher |
| Front passenger side seat occupied, seat belt unfastened | Below 1 Ω |
Reconnect the 3A, 3G and 3K main body ECU (fuse block assembly) connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 3I-5 - Body ground | W - Body ground | ACC power supply | Ignition switch off | Below 1 V |
| Ignition switch ACC | 11 to 14 V | |||
| 3C-6 - Body ground | B - Body ground | Ignition switch power supply | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V |
If the result is not as specified, there may be a malfunction in the wire harness.
COMBINATION METER ASSEMBLY
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| E34-19 (BTEG) - Body ground | R - Body ground | Front passenger side seat belt Warning Light signal | Ignition switch ON, Front passenger side seat belt Warning Light on | Below 1 V |
| Ignition switch ON, Front passenger side seat belt Warning Light off | 11 to 14 V |