Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2015.08
RM19Y0E _58 Vehicle Interior _003007 LIGHTING (INT) _0015198 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  SYSTEM DESCRIPTION  


ILLUMINATED ENTRY SYSTEM


HINT:

When inspecting the following functions, make sure that the map light switch and No. 2 room light switch are in the DOOR position.


a.

The illuminated entry system has the following control functions:

Control Outline Light that Operates
Door Open-linked
·

When any door is opened, the lights that operate turn on.*1

·

When driver side door or front passenger side door is opened, the lights that operate turn on.*2


·

Map light assembly

·

No. 2 room light assembly


Door Close-linked When all doors are closed, the lights that operate illuminate for 15 seconds and then turn off.
Door Lock-linked
·

When driver side door is closed and locked, the lights fade out.

·

When any door is unlocked, the lights that operate illuminate for 15 seconds and then turn off.


Ignition Switch-linked When the ignition switch is turned from off to ON, the lights that operate turn off.
Ignition Key Cylinder-linked When the ignition switch is turned from on to off with all doors closed, the lights that operate illuminate for 15 seconds and then turn off.
Battery Saving
·

When any door remains open for 10 minutes with the ignition switch off, the lights that operate turn off.*1

·

When driver side door or front passenger side door remains open for 10 minutes with the ignition switch off, the lights that operate turn off.*2


Room Light System Battery Saving When the map light assembly and No. 2 room light assembly are left on with the ignition switch off, they will automatically go off after 12 minutes regardless of their switch positions.

*1: w/ Rear Door Courtesy Light Switch

*2: w/o Rear Door Courtesy Light Switch