Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2015.08
RM19Y0E _58 Vehicle Interior _003007 LIGHTING (INT) _0015198 LIGHTING SYSTEM U

LIGHTING (INT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (FUSE BLOCK ASSEMBLY)


a.

Disconnect the 3A and 3G main body ECU (fuse block assembly) connectors.

E317948N01
0.781,4.688 1.198,4.938 0.417,0.25 1.896,4.688 2.313,4.938 0.417,0.25 1.323,5.698 1.74,5.948 0.417,0.25 0.594,6.823 1.01,7.073 0.417,0.25 2.031,6.813 2.448,7.063 0.417,0.25 1.344,7.75 1.76,8 0.417,0.25 5.885,6.813 6.302,7.063 0.417,0.25 4.26,4.698 4.677,4.948 0.417,0.25 5.844,4.677 6.26,4.927 0.417,0.25 5.854,5.688 6.271,5.938 0.417,0.25 4.219,5.698 4.635,5.948 0.417,0.25 4.25,6.813 4.667,7.063 0.417,0.25 1.781,2.885 2.167,3.177 0.385,0.292 10 false 3B 2.115,2.906 2.51,3.208 0.396,0.302 10 false 3C 1.708,3.219 2.115,3.5 0.406,0.281 10 false 3D 4.781,2.01 5.25,2.333 0.469,0.323 10 false 3E 4.792,2.625 5.167,2.917 0.375,0.292 10 false 3F 4.771,3.25 5.25,3.583 0.479,0.333 10 false 3G 1.344,3.479 1.74,3.781 0.396,0.302 10 false 3K 1.365,2.99 1.76,3.292 0.396,0.302 10 false 3L 4.521,3.802 4.917,4.104 0.396,0.302 10 false 3H 5.083,3.802 5.479,4.104 0.396,0.302 10 false 3I 5.604,3.792 6.083,4.167 0.479,0.375 10 false 3J 1.729,2.563 2.083,2.833 0.354,0.271 10 false 3A 0.906,4.729 1.333,5 0.427,0.271 10 false 3A 2.01,4.729 2.396,5.021 0.385,0.292 10 false 3B 1.448,5.74 1.917,6.083 0.469,0.344 10 false 3C 0.719,6.865 1.125,7.146 0.406,0.281 10 false 3D 5.979,5.74 6.417,6.083 0.438,0.344 10 false 3E 4.385,6.865 4.802,7.188 0.417,0.323 10 false 3F 6.01,6.865 6.427,7.188 0.417,0.323 10 false 3G 4.385,4.75 4.781,5.052 0.396,0.302 10 false 3H 6,4.729 6.396,5.031 0.396,0.302 10 false 3I 4.365,5.74 4.76,6.042 0.396,0.302 10 false 3J 1.469,7.802 1.865,8.104 0.396,0.302 10 false 3K 2.167,6.865 2.563,7.167 0.396,0.302 10 false 3L


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3A-1 - Body ground B - Body ground Battery power supply Always 11 to 14 V
3G-1 - Body ground W-B - Body ground Ground Always Below 1 Ω
3G-11 - Body ground W - Body ground Ground Always Below 1 Ω
3G-12 - Body ground BR - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Reconnect the 3A and 3G main body ECU (fuse block assembly) connectors.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
3C-6 - Body ground B - Body ground Ignition switch power supply Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
3I-5 - Body ground W - Body ground ACC power supply Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
3E-16- Body ground G - Body ground Interior lights input
·

Turn the map light switch and No. 2 room light switch to the DOOR position

·

Any door is open*1

·

Driver side door or front passenger side door is open*2


Below 1 V
·

Turn the map light switch and No. 2 room light switch to the DOOR position

·

All doors are closed


11 to 14 V
3E-17 - Body ground V - Body ground Power source of Interior lights Always (except when room light system battery saving is in operation) 11 to 14 V
3G-15 - Body ground G - Body ground Unlock warning switch input No key in ignition key cylinder Below 1 V
Key inserted into ignition key cylinder 11 to 14 V
3I-9 - Body ground V - Body ground Power source of unlock warning switch input Always 11 to 14 V
3L-13 - Body ground GR-B - Body ground*3
LG-B - Body ground*4
Door courtesy switch (for driver side) input Driver side door open Below 1 V
Driver side door closed Pulse generation (See waveform)
3L-14 - Body ground LG-B - Body ground*3
GR-B - Body ground*4
Door courtesy switch (for front passenger side) input Front passenger side door open Below 1 V
Front passenger side door closed Pulse generation (See waveform)
3L-6 - Body ground*1 GR - Body ground Door courtesy switch (for rear RH side) input Rear RH side door open Below 1 V
Rear RH side door closed Pulse generation (See waveform)
3K-6 - Body ground*1 B - Body ground Door courtesy switch (for rear LH side) input Rear LH side door open Below 1 V
Rear LH side door closed Pulse generation (See waveform)
3K-5 - Body ground W - Body ground Door courtesy switch (back door) input Back door open Below 1 V
Back door closed Pulse generation (See waveform)
3G-13 - Body ground B - Body ground Driver side door key-linked switch lock input Driver side door key cylinder in neutral position Pulse generation (See waveform)
Driver side door key cylinder in lock position Below 1 V
3G-14 - Body ground L - Body ground Driver side door key-linked switch unlock input Driver side door key cylinder in neutral position Pulse generation (See waveform)
Driver side door key cylinder in unlock position Below 1 V

If the result is not as specified, the main body ECU (fuse block assembly) may have a malfunction.


*1: w/ Rear Door Courtesy Light Switch

*2: w/o Rear Door Courtesy Light Switch

*3: for RHD

*4: for LHD



e.

Inspect using an oscilloscope.

NOTICE:

The waveform shown in the illustration is an example for reference only. Noise, chattering, etc. are not shown.


i.
B413858N01
2.958,0.979 3.427,1.458 0.469,0.479 10 false GND

Waveform (Reference)

Measurement Condition:
Item Content
Tester Connection 3L-13 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Driver side door closed

Item Content
Tester Connection 3L-14 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Front passenger side door closed

Item Content
Tester Connection 3L-6 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Rear RH side door closed

Item Content
Tester Connection 3K-6 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Rear LH side door closed

Item Content
Tester Connection 3K-5 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Back door closed

Item Content
Tester Connection 3G-13 - Body ground
3G-14 - Body ground
Tool Setting 5 V/DIV., 10 ms./DIV.
Condition Driver side door key cylinder in neutral position