POWER WINDOW CONTROL SYSTEM DESCRIPTION
The power window control system controls the power window up/down function using the power window regulator motors.
The main controls of this system are: the power window regulator master switch assembly, which is built into the driver side door, and the power window regulator switch assembly, which is built into the front passenger side door and rear side doors. Pressing the power window regulator switch assembly or any of the switches on the power window regulator master switch assembly transmits an up/down signal to the corresponding power window regulator motor assembly.
FUNCTION OF MAIN COMPONENT
The power window control system consists of the following components.
| Component | Outline |
|---|---|
| Power window regulator master switch assembly | ·
Controls window operations for all the windows. ·
When the window lock switch is set to the lock position, driver side window operation is only possible with the power window regulator master switch assembly. |
| Power window regulator switch assembly | ·
Located on front passenger side and rear side. ·
The power window regulator switch assembly controls window operations for its respective window. |
| Power window regulator motor assembly | Receives switch signals and changes signals into motor activation to change window position. |
SYSTEM FUNCTION
The power window control system has the following functions.
| Function | Outline |
|---|---|
| Manual up-and-down function | ·
for driver side: Function that causes the window to go up while the power window regulator master switch assembly is being pulled halfway up and to go down while pushed halfway down. The window stops as soon as the switch is released. ·
for front passenger side and rear side: Function that causes the window to go up while the front passenger side or rear side power window regulator switch assembly is being pulled up and to go down while pushed down. The window stops as soon as the switch is released. |
| Driver door auto up-and-down function | Function that enables the driver side window to be fully opened or closed by one full pull or push of the power window regulator master switch assembly. |
| Remote control function | Function that allows the power window regulator master switch assembly to control manual up and down operation of the front passenger side and rear side windows. |
| Window lock function | ·
Function where passenger power windows operation is disabled when the window lock switch of the master switch is pressed. ·
The front passenger side and rear side power window regulator switch assemblies can be operated when the window lock switch is pressed again. |
| Jam protection function (for driver side) | Function that automatically stops the power window and moves it downward if foreign object gets jammed in the door window during auto up or manual up operation. |
| Key-off operation function | ·
Function that makes it possible to operate the driver side power windows for approximately 43 seconds after the ignition switch is turned off. ·
When 43 seconds have elapsed after the ignition switch is turned off, the key-off operation function will be disabled. |