LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/LIGHT AUTO TURN-OFF SYSTEM)
Close the driver side door.
Turn the ignition switch to ON.
Turn the headlight dimmer switch assembly (light control switch) to the tail or head position.
Turn the ignition switch off.
Open the driver door.
Check that all of the lights go off immediately.
TRIPLE-BLINK TURN SIGNAL CHECK
Perform this inspection with the customizable parameters set to the initial settings.
Turn the ignition switch to ON.
Depress the headlight dimmer switch assembly (turn signal switch) halfway and then release your hand from the headlight dimmer switch assembly (turn signal switch).
Check that the turn signal lights blink 3 times and then go off.
Depress the headlight dimmer switch assembly (turn signal switch) halfway and hold it in position.
Check that the turn signal lights keep blinking.
Release your hand from the headlight dimmer switch assembly (turn signal switch) and check that the turn signal lights go off.