CUSTOMIZE LIGHTING SYSTEM (EXT)
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS or Techstream
Connect the GTS or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the GTS or Techstream on.
Enter the following menus: Customize Setting / Combi switch.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Turn 3 blinking customize | ON | ON/OFF setting of triple-blink signal when headlight dimmer switch assembly (turn signal switch) is moved halfway | 01:OFF, 40:ON | Switch base |
| Blinking permit counter | 750 ms | Time limit setting for canceling the triple-blink signal (if a canceling operation is made after set time limit, the turn signal lights on the opposite side will blink 3 times.) | 01:350 ms, 02:750 ms, 03:1000 ms, 04:1500 ms | Switch base |