Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for 2NR-VE) › from 2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0197228 CLUTCH MASTER CYLINDER(for 2NR-VE) A

CLUTCH  CLUTCH MASTER CYLINDER(for 2NR-VE)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL MASTER CYLINDER INLET UNION

C250698

a.

Apply lithium soap base glycol grease to a new clutch reservoir grommet.


b.

Install a clutch reservoir grommet and the master cylinder inlet union.


c.
C145595C01
0.803,2.451 0.996,2.638 0.193,0.188 10 *a
*a 1.5 to 3.5 mm (0.059 to 0.138 in.)


Using a pin punch and hammer, tap in the spring pin.


Hide 2.INSTALL MASTER CYLINDER PISTON SUB-ASSEMBLY

C145219

a.

Install 2 new cylinder cups onto the master cylinder piston sub-assembly.


b.

Apply lithium soap base glycol grease to the portions shown in the illustration.


c.

Install the master cylinder piston sub-assembly and spring into the cylinder body.


d.

Install the piston stop plate onto the clutch master cylinder push rod.


e.

Install the clutch master cylinder push rod into the cylinder body.


f.
C145216

Using snap ring pliers, install the snap ring while pushing the master cylinder push rod.


Hide 3.INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

C145215

a.

Install the lock nut onto the clutch master cylinder push rod.


b.

Install the clutch master cylinder push rod clevis onto the clutch master cylinder push rod.