Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER(for 2NR-VE) › from 2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0197229 CLUTCH RELEASE CYLINDER(for 2NR-VE) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 2NR-VE)  INSTALLATION  


PROCEDURE

Hide 31470 1.INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

a.

Install the clutch release cylinder assembly with the 2 bolts.

Torque:
18.2 N*m (186 kgf*cm, 13 ft.*lbf)


b.

Install the No. 2 clutch hose with the union bolt and a new gasket.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 2.FILL RESERVOIR WITH BRAKE FLUID

Hide 4.INSPECT FOR BRAKE FLUID LEAK

Hide 51443 6.INSTALL NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)