CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the GTS or Techstream
Connect the GTS or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the GTS or Techstream on.
Enter the following menus: Customize Setting / Warning or Display.
Select the setting by referring to the table below.
Be sure to record the current value before customizing.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Flasher Buzzer Sound Setting | Function to change Flasher buzzer sound | ON | 0:OFF,1:ON | Combination meter assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ECO Drive Indicator | Function to turn on/off the ECO driving indicator in the combination meter assembly | ON | 0:OFF,1:ON | Combination meter assembly |