Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › from 2015.08
RM19Y0E _54 Brake _002992 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0015137 ANTI-LOCK BRAKE SYSTEM U

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  TERMINALS OF ECU  


TERMINALS OF ECU


C330018C02
0.417,0.344 0.729,0.542 0.313,0.198 10 false *a
*a Component without harness connected
(Skid Control ECU (brake actuator assembly))
- -


Terminal No. (Symbol) Terminal Description
1 (GND2) Pump motor ground
10 (CANL) CAN communication low line
12 (+IG) ECU power supply
13 (+BM) Motor relay power supply
15 (RR0) Rear wheel speed RH (-) signal input
16 (RR1) Rear wheel speed RH (+) signal input
17 (FL0) Front wheel speed LH (-) signal input
18 (FL1) Front wheel speed LH (+) signal input
22 (CANH) CAN communication high line
25 (GND1) Skid control ECU ground
28 (RL0) Rear wheel speed LH (-) signal input
29 (RL1) Rear wheel speed LH (+) signal input
30 (FR0) Front wheel speed RH (-) signal input
31 (FR1) Front wheel speed RH (+) signal input
35 (STP) Stop light switch input
38 (+BS) Solenoid relay power supply


TERMINAL INSPECTION


a.

Disconnect the connector and measure the voltage or resistance on the wire harness side.

C330096C01
0.521,0.448 0.833,0.646 0.313,0.198 10 false *a
*a Front view of wire harness connector
(to Skid Control ECU (Brake Actuator Assembly))
- -


HINT:

The voltage cannot be measured with the connector connected to the skid control ECU (brake actuator assembly) as the connector is watertight.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A13-1 (GND2) - Body ground W-B - Body ground Pump motor ground Always Below 1 Ω
A13-10 (CANL) - Body ground G - Body ground CAN bus Ignition switch off 54 to 69 Ω
A13-12 (+IG) - Body ground L - Body ground ECU power supply Ignition switch ON 11 to 14 V
A13-13 (+BM) - Body ground R - Body ground Motor relay power supply Always 11 to 14 V
A13-22 (CANH) - Body ground R - Body ground CAN bus Ignition switch off 54 to 69 Ω
A13-25 (GND1) - Body ground BR - Body ground Skid control ECU ground Always Below 1 Ω
A13-35 (STP) - Body ground BE - Body ground Stop light switch input Brake pedal depressed → released 6 to 14 V → Below 2 V
A13-38 (+BS) - Body ground P - Body ground Solenoid relay power supply Always 11 to 14 V