84540
1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
| *a | Component without harness connected
(Park/neutral Position Switch Assembly) |
Measure the resistance of the park/neutral position switch assembly when the shift lever is moved to each position.
| Tester Connection | Shift Position | Specified Condition |
|---|---|---|
| 4 (P) - 6 (E) | P | Below 1 Ω |
| Except P | 10 kΩ or higher | |
| 1 (+) - 7 (-) | R | Below 1 Ω |
| Except R | 10 kΩ or higher | |
| 5 (N) - 6 (E) | N | Below 1 Ω |
| Except N | 10 kΩ or higher | |
| 3 (D) - 6 (E) | D | Below 1 Ω |
| Except D | 10 kΩ or higher | |
| 2 (2) - 6 (E) | 2 | Below 1 Ω |
| Except 2 | 10 kΩ or higher | |
| 6 (E) - 8 (L) | L | Below 1 Ω |
| Except L | 10 kΩ or higher |
If the result is not as specified, replace the park/neutral position switch assembly.