Home › Drivetrain › A4R AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER › from 2015.08
RM19Y0E _52 Drivetrain _041457 A4R AUTOMATIC TRANSMISSION / TRANSAXLE _0197965 SHIFT LEVER N

A4R AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ADJUSTMENT  


PROCEDURE

Hide 33550 1.ADJUST TRANSMISSION FLOOR SHIFT ASSEMBLY

a.

Move the shift lever to N.


b.
C267371

Loosen the bolt of the transmission control cable assembly.


c.
C153890C02
2.856,0.561 3.032,0.713 0.176,0.151 10 *1 2.329,0.619 2.827,0.645 false
*1 Transmission Control Shaft Lever


Turn the transmission control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.


d.
C267371

While holding the shift lever lightly toward the R position side, tighten the bolt.

Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)