Home › Drivetrain › A4R AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE › from 2015.08
RM19Y0E _52 Drivetrain _041457 A4R AUTOMATIC TRANSMISSION / TRANSAXLE _0197966 TRANSMISSION CONTROL CABLE A

A4R AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 51443 1.REMOVE NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)

Hide 33820B 2.SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C155554

Remove the 2 clips, and disconnect the transmission control cable assembly.

NOTICE:

Do not excessively bend the flexible sections at the ends of the transmission control cable assembly.



Hide 33820B 3.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C332963

Release the transmission control cable assembly from the cable clamp.


b.
C267371

Remove the bolt and disconnect the transmission control cable assembly.

NOTICE:

Do not excessively bend the flexible sections at the ends of the transmission control cable assembly.



c.
C331405

Remove the clip and disconnect the transmission control cable assembly.

NOTICE:

Do not carry the transmission control cable assembly by the flexible sections.