Home › Drivetrain › A4R AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP › from 2015.08
RM19Y0E _52 Drivetrain _041457 A4R AUTOMATIC TRANSMISSION / TRANSAXLE _0197971 OIL PUMP G

A4R AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  INSPECTION  


PROCEDURE

Hide 35301 1.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

a.
C331484

Using a dial indicator, measure the inside diameter of the front oil pump body sub-assembly bushing.

Maximum inside diameter:

23.52 mm (0.9260 in.)


If the inside diameter is greater than the maximum, replace the front oil pump body sub-assembly.


b.
C154021

Using a dial indicator, measure the inside diameter of the stator shaft bushing.

Maximum inside diameter:

18.72 mm (0.7370 in.)


If the inside diameter is greater than the maximum, replace the front oil pump body sub-assembly.