51443
1.REMOVE NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)
2.DRAIN MANUAL TRANSMISSION OIL
| *1 | Filler plug |
| *2 | Drain plug |
Remove the filler plug and the gasket.
Remove the drain plug and gasket, and then drain the manual transmission oil.
Install a new gasket and the drain plug.
3.ADD MANUAL TRANSMISSION OIL
| *a | 0 to 5 mm (0 to 0.20 in.) |
Add manual transmission oil until the oil level is within 5 mm (0.20 in.) from the bottom of the filler plug opening.
1.13 liters (1.19 US qts, 0.994 Imp. qts)
1.08 liters (1.14 US qts, 0.950 Imp. qts)
API GL-4 and SAE 80W
Install the filler plug and a new gasket.
4.INSPECT MANUAL TRANSMISSION OIL
51443
5.INSTALL NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)