Home › Drivetrain › M5S MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT TRANSMISSION CONTROL CABLE › from 2015.08
RM19Y0E _52 Drivetrain _002985 M5S MANUAL TRANSMISSION / TRANSAXLE _0015103 SHIFT AND SELECT TRANSMISSION CONTROL CABLE A

M5S MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

C267830N01
0.906,0.271 1.063,0.469 0.156,0.198 10 B 1.094,1.573 1.25,1.771 0.156,0.198 10 A

a.

Install the transmission control cable assembly in the following order.

i.

Install the transmission control cable assembly indicated by A with the washer and clip.


ii.

Install the transmission control cable assembly indicated by B with the clip.



b.

Connect the transmission control cable assembly to the transmission control cable bracket with 2 new clips.


c.

Install the transmission control cable assembly to the transmission control cable clamp.


d.

Install the transmission control cable assembly and transmission control cable clamp with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Connect the transmission control cable assembly with 2 new clips.


b.

Connect the transmission control cable assembly to the transmission floor shift assembly.


c.

Connect the transmission control cable assembly with the clip and washer.


Hide 58804A 3.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 33504F 4.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 58839A 5.INSTALL CONSOLE BOX HOLE COVER (w/o Rear Console Box)

Hide 58910C 6.INSTALL REAR CONSOLE BOX ASSEMBLY (w/ Rear Console Box)

Hide 51443 7.INSTALL NO. 2 ENGINE UNDER COVER (w/ No. 2 Engine Under Cover)