CHECK DTC
Connect the GTS or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the GTS or Techstream on.
Enter the following menus: Powertrain / EFI / Trouble Codes.
Check for DTCs, and then write them down.
Check the details of the DTCs.
Click herePower Source / Network>2NR-VE BATTERY / CHARGING>CHARGING SYSTEM>DIAGNOSTIC TROUBLE CODE CHART
CLEAR DTC
Connect the GTS or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the GTS or Techstream on.
Enter the following menus: Powertrain / EFI / Clear DTCs.
Clear the DTCs.