Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the RHD vehicle.
85330
1.REMOVE WINDSHIELD WASHER JAR WITH WASHER MOTOR
Disconnect the washer hose.
Disconnect the connector and disengage the clamp.
Disconnect the 2 washer hoses from the windshield washer motor and pump assembly, and drain the washer fluid.
Use a container to collect the washer fluid.
Remove the 2 bolts.
Disengage the guide to remove the windshield washer jar with washer motor.
85310C
2.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
|
Packing |
Pull the windshield washer motor and pump assembly out of the packing of the windshield washer jar sub-assembly.