Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › from 2015.08
RM19Y0E _59 Vehicle Exterior _003019 WIPER / WASHER _0197888 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD and LHD vehicles.

·

The procedure listed below is for the RHD vehicle.



PROCEDURE

Hide 85310C 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.

Install the windshield washer motor and pump assembly onto the packing of the windshield washer jar sub-assembly.


Hide 85330 2.INSTALL WINDSHIELD WASHER JAR WITH WASHER MOTOR

a.

Engage the guide.


b.

Install the windshield washer jar with washer motor with the 2 bolts.

Torque:
3.4 N*m (35 kgf*cm, 30 in.*lbf)


c.

Connect the connector and engage the clamp.


d.

Connect the washer hose.


Hide 3.FILL UP WINDSHIELD WASHER JAR WITH WASHER FLUID

a.

Refill with the windshield washer fluid.